Defender Gate™ XL

WHAT YOU SHOULD KNOW ABOUT THE DEFENDER GATE™ XL

The NOVA Defender Gate™ XL is available in larger sizes up to 16-feet wide and has double rails like the DG20. Bollards and trusses support the added weight of the elongated design, and a third top handle is included to ensure ease of operation. The DGXL provides a larger coverage area for increasing in-plant safety and security or protecting loading docks and other elevated surfaces.

FEATURES AND BENEFITS

Meets OSHA guidelines for fall protection
Three top handles for easy operation
Ships in three pieces (all hardware included)
Locking pin with an included padlock
Safety Guard attachments and electronic interlock options available
We offer custom sizes and configurations
Made in USA

SPECIFICATIONS

Effortless opening and closing
Swings open for full pass-through clearance
Equipped with double guardrails
Equipped with bollards for added support
Requires little to no maintenance
Durable all-steel construction
Self-lubricating hardware
Built-in leveling screws
Standard sizes available from 12 to 16-feet

SAFETY FEATURES

Provides a larger coverage area for increasing in-plant safety and security or protecting loading docks and other elevated surfaces
Safety Guards for the double-rail DGXL add barriers above, below, and in-between the rails that reach 72-inches high and extend to 6-inches above the floor for overhead and crawl-through protection
Powder-coated yellow finish with 3M® reflective tape

STRUCTURAL

The bollards are constructed from 4-inch square, 3/16-inch thick A-500 Grade B steel tubing. The tubes are welded to 3/8-inch thick A-36 steel base plates and anchored to the floor with a total of (24) 3/4 x 6-inch long concrete anchor bolts, included. The main center sections of the gate are made from A-500 Grade B rectangular steel tubing, 10 x 3 x 1/8-inches thick, and joined in the middle with a center pin. The entire gate is powder-coated safety yellow for optimal visibility and durability.

Based on its engineered design and proven by standardized testing the Defender Gate™ can stop a 13,500-pound forklift traveling at 6.5 mph. To better quantify the impact rating designation and provide a better degree of impact protection, the Gate can be rated in terms of total Kinetic Energy absorbed.

The chart below helps understand the effects of various speeds and weights based on the Kinetic Energy absorbed. The Defender Gate™ is engineered to provide effective protection for any combination of vehicle mass and speed in the green shaded area of the chart.

WHAT YOU SHOULD KNOW ABOUT THE DEFENDER GATE™ XL

FEATURES AND BENEFITS

SPECIFICATIONS

DEFENDER GATE™ XL WITH SAFETY GUARD

SAFETY FEATURES

STRUCTURAL

OPERATION